Items where Subject is "Engineering"

A

A. Adeleye, Samson and Oluwaleye, Iyiola O. and Oni, Taiwo O. (2021) Experimental Study of the Effects of Convective Drying on Some Selected Vegetables. Journal of Engineering Research and Reports, 21 (7). pp. 29-43. ISSN 2582-2926

A. De Asis, Celeste (2021) Comparison of Normal Ratio Method and Distance Power Method for Estimating Missing Rainfall Data with Three Neighboring Stations. Journal of Engineering Research and Reports, 21 (6). pp. 1-9. ISSN 2582-2926

Aboubakri, Akam and Ahmadi, Vahid Ebrahimpour and Celik, Suleyman and Sadaghiani, Abdolali K. and Sefiane, Khellil and Kosar, Ali (2021) Effect of Surface Biphilicity on FC-72 Flow Boiling in a Rectangular Minichannel. Frontiers in Mechanical Engineering, 7. ISSN 2297-3079

Ali, Hussein Al- (2020) Process Simulation for Crude Oil Stabilization by Using Aspen Hysys. Journal of Engineering Research and Reports, 16 (4). pp. 14-28. ISSN 2582-2926

Anigbogu, Winner and Nguyen, Hieu and Bardaweel, Hamzeh (2021) Layered Metamaterial Beam Structures With Local Resonators for Vibration Attenuation: Model and Experiment. Frontiers in Mechanical Engineering, 7. ISSN 2297-3079

Annadate, Mrunal Ninad and Nagmode, Manoj (2020) Critical Research on Tracking of Blood Movement in the Heart Using Elongated Horizontal Large Diamond Search Pattern and Optical Flow Technique for Enabling the Detection of Atrial Septal Defect. In: Recent Developments in Engineering Research Vol. 4. B P International, pp. 19-44. ISBN 978-81-947204-1-6

Arinze Victor, Ogunoh, and Innocent Eteli, Digitemie, and Patrick Sunday, Aguh, (2018) Prediction and Appraisal of Solar Radiations and Its Intensity in South East Geopolitical Region, Nigeria. Journal of Engineering Research and Reports, 1 (1). pp. 1-16. ISSN 2582-2926

Armaghan Siffat, Muhammad and Ishfaq, Muhammad and Ahmad, Afaq and Rehman, Khalil Ur and Ahmad, Fawad (2021) Effect of Locally Available Wheat Straw Ash in Developing High Strength Concrete. Journal of Engineering Research and Reports, 21 (7). pp. 19-28. ISSN 2582-2926

Ashwani, K. and Vijay, Banga K. and Darshan, K. (2020) Modelling and Comparative Analysis of 5R Manipulator Using Evolutionary Algorithms. In: Recent Developments in Engineering Research Vol. 2. B P International, pp. 107-124. ISBN 978-93-90206-88-9

B

B. I. Shaheen, Yousry and M. Eid, Fatma and Mesalam, Omnia (2021) Structural Behavior of Ferrocement Concrete Plates Subjected to Flexural and Dynamic Loadings. Journal of Engineering Research and Reports, 21 (7). pp. 71-84. ISSN 2582-2926

Babalola, T. E. and Babalola, A. D. and Olokun, M. S. (2021) Development of IOT Device for Sensing Weather and Environmental Pollutants. Journal of Engineering Research and Reports, 21 (6). pp. 29-40. ISSN 2582-2926

Bacquian, Bryan Christian S. and Gomez, Frederick Ray I. and Graycochea Jr., Edwin M. (2020) Ball Misplace Mitigation through Process Optimization of Advanced Leadframe Package. Journal of Engineering Research and Reports, 16 (4). pp. 35-38. ISSN 2582-2926

Beloufa, Amine (2024) A Comprehensive Study on Optimizing Mechanical Stress, Contact Temperature, and Electrical Contact Resistance. In: Theory and Applications of Engineering Research Vol. 9. B P International, pp. 114-139. ISBN 978-81-971580-7-0

Bhyan, Ar. Parul and Shrivastava, Bhavna and Kumar, Nand (2021) Behavioural Factors Affecting the Adoption of Sustainable Housing Practices: Indian Context. In: Advanced Aspects of Engineering Research Vol. 14. B P International, pp. 92-97. ISBN 978-93-91215-89-7

C

Chinvorarat, Sinchai and Watjatrakulq, Boonchai and Nimdum, Pongsak and Sangpet, Teerawat and Soontornpasatch, Tosaporn and Vallikul, Pumyos (2021) Study on Static Testing for Composite Wing of a Two-seater Seaplane. In: Advanced Aspects of Engineering Research Vol. 8. B P International, pp. 101-111. ISBN 978-93-90888-73-3

Ciureanu, Ioan-Adrian and Condurache, Daniel (2015) A Quaternion Solution of the Motion in a Central Force Field Relative to a Rotating Reference Frame. World Journal of Mechanics, 05 (05). pp. 71-79. ISSN 2160-049X

Cruz, Juan J. and Verdugo, Ignacio and Gutiérrez-Cáceres, Nicolás and Escudero, Felipe and Demarco, Rodrigo and Liu, Fengshan and Yon, Jérôme and Chen, Dongping and Fuentes, Andrés (2021) Soot Volume Fraction Measurements by Auto-Compensating Laser-Induced Incandescence in Diffusion Flames Generated by Ethylene Pool Fire. Frontiers in Mechanical Engineering, 7. ISSN 2297-3079

D

Dahunsi, Bamidele I. O. and Idusuyi, Daniel U. (2020) Technical Properties and Potential Application of Waste Engine Oil as Bitumen Modifier in Pavement Construction. Journal of Engineering Research and Reports, 16 (4). pp. 8-13. ISSN 2582-2926

Daniel, Ogbebor and N. John, Ugbebor and L. Yusuf, Momoh O. and Onyedikachukwu, Ndekwu B. (2021) Land Pollution Assessment from Slaughterhouses Waste Discharge in Port Harcourt. Journal of Engineering Research and Reports, 21 (6). pp. 10-28. ISSN 2582-2926

Deivanathan, R. and Teja, Kodali Sai and Manikanta, Medikonduru (2022) Prediction of IC Engine Emission Constituents Using MINITAB. In: Techniques and Innovation in Engineering Research Vol. 4. B P International, pp. 34-44. ISBN 978-93-5547-989-1

Devi, S. Sharmila (2021) Safety Systems in Car Using Raspberry-Pi. In: Advanced Aspects of Engineering Research Vol. 8. B P International, pp. 91-100. ISBN 978-93-90888-73-3

Dutta, Sweety (2024) Design of an Autonomous Seed Sowing Robot. In: Theory and Applications of Engineering Research Vol. 9. B P International, pp. 140-151. ISBN 978-81-971580-7-0

Dölle, Klaus and Rainville, Hélène (2021) Art Paper for Large Wood Relief Block Printing – A Paper Development Study. Journal of Engineering Research and Reports, 21 (7). pp. 1-18. ISSN 2582-2926

E

Elhakimi, A. and Chamat, A. and Touache, A. and Daya, A. and Hariri, S. (2015) Experimental Study of Longitudinal and Circumferential External Defect in Pressured Cylindrical Shells. World Journal of Mechanics, 05 (06). pp. 95-105. ISSN 2160-049X

F

Fabuyi, Jumai Adedoja (2024) Leveraging Synthetic Data as a Tool to Combat Bias in Artificial Intelligence (AI) Model Training. Journal of Engineering Research and Reports, 26 (12). pp. 24-46. ISSN 2582-2926

Fan, Xiaoshuai and Jiang, Zhenyu and Bai, Xibin and Zhang, Shifeng and Liu, Longbin (2021) Design and Verification of Flush Air Data Sensing Module with Navigation and Temperature Information. Aerospace, 8 (11). p. 336. ISSN 2226-4310

Faturachman, Danny and Pujiastuti, Endang Tri and Fridolini, . (2022) Use of Ship Main Engine Cooling Water for the Design of Micro Hydro Power Plants. In: Techniques and Innovation in Engineering Research Vol. 4. B P International, pp. 45-57. ISBN Dr. Hasan Aydogan Techniques and Innovation in Engineering Research Vol. 4 11 12 2022 11 12 2022 9789355479884 B P International (a part of SCIENCEDOMAIN International) 10.9734/bpi/taier/v4 https://stm.bookpi.org/TAIER-V4/issue/view/859

Furukawa, Hiroyuki and Suzuki, Tomohito (2018) Study on Non-Uniqueness of Taylor Vortex Flow Changing Inner Cylinder Acceleration Time. World Journal of Mechanics, 08 (08). pp. 301-310. ISSN 2160-049X

G

Ghosh, Swapan Kumar (2018) Transient MHD Couette Flow in a Rotating Environment Permeated by an Inclined Magnetic Field by Means of a Traveling Magnetic Field Subject to a Forced Oscillation. World Journal of Mechanics, 08 (09). pp. 362-377. ISSN 2160-049X

Guo, Shuhan (2023) An Overview of NV Centers. Journal of Applied Mathematics and Physics, 11 (11). pp. 3666-3675. ISSN 2327-4352

Gurrala, Vijayakumar and Yarlagadda, Padmasai and Koppireddi, Padmaraju (2020) Extraction of Wavelet Features for the Classification of Sleep Stages Using Single Channel EEG. In: Recent Developments in Engineering Research Vol. 2. B P International, pp. 150-156. ISBN 978-93-90206-88-9

H

Halsey, William and Rose, Derek and Scime, Luke and Dehoff, Ryan and Paquit, Vincent (2021) Localized Defect Detection from Spatially Mapped, In-Situ Process Data With Machine Learning. Frontiers in Mechanical Engineering, 7. ISSN 2297-3079

Harith, Noor Sheena Herayani (2021) Peak Ground Acceleration of East Malaysia Based on a Proposed Ground Motion Prediction Equation. In: Advanced Aspects of Engineering Research Vol. 8. B P International, pp. 74-81. ISBN 978-93-90888-73-3

Hashim, Nik Alif Amri Nik and Aziz, Roslizawati Che and Ramlee, Shah Iskandar Fahmie and Safri, Fauzan Hafiz Muhammad and Zulkiffli, Wan Farha Wan and Awang, Zaimatul and Marican, Nor Dalila (2020) Emphasizing the Consumer Perceived Risk and Technology Tools: The Reliability and Validity of Instrument. In: Recent Developments in Engineering Research Vol. 4. B P International, pp. 11-18. ISBN 978-81-947204-1-6

Hu, Dahai (2023) Summary of Research on Digital Twin Workshop. Journal of Engineering Research and Reports, 25 (1). pp. 41-49. ISSN 2582-2926

Hyacienth, Okoye Akachukwu and Kenneth, Ainah Priye and Ogbonnaya, Ibe Anthony (2023) Modeling and Simulation of Energy Storage Performance of Renewable Energy Storage System. Journal of Engineering Research and Reports, 25 (11). pp. 99-105. ISSN 2582-2926

I

Ibrahim, Md. and Mallick, M. A. and Chankaya, Mukul and Iqbal, Atif and Hussain, Ikhlaq (2020) Control Algorithm on Variable Parameter Resized Zero Attracting Least Mean Fourth Control for Grid- Tied PV System. In: Recent Developments in Engineering Research Vol. 2. B P International, pp. 95-106. ISBN 978-93-90206-88-9

Ijah, A. A. and Bolaji, O. W. and Adedire, O. O. and Emmanuel, J. Z. and Onwuegbunam, N. E. and Oloyede, O. D. and Afolabi, A. O. (2020) Design and Construction of a Soil Moisture Measuring. Journal of Engineering Research and Reports, 16 (4). pp. 29-34. ISSN 2582-2926

Ita, Okon, Edet and Ndubuka, Chinedu Ikenna and Livinus, Aniefiok and Ini-Obong, Asuquo and Umana, Mfonobong and Idiok, Ubong Thompson (2024) The Application of Water Alternating Gas Injection to Maximize Oil Recovery in the Niger Delta. Journal of Engineering Research and Reports, 26 (3). pp. 174-189. ISSN 2582-2926

Ivanchin, Alexander (2018) Delusions in Theoretical Hydrodynamics. World Journal of Mechanics, 08 (09). pp. 387-415. ISSN 2160-049X

J

James Ujam, Chinedu and Chukwuemeka Godwin, Harold (2018) Optimization of Packaging Line Performance: A Case Study of AB Breweries in Nigeria. Journal of Engineering Research and Reports, 1 (1). pp. 1-22. ISSN 2582-2926

Jenkins, Peter E. and Kuryachy, Artem (2018) Simulink/MATLAB Model for Assessing the Use of a Centrifugal Pump as a Hydraulic Turbine. World Journal of Mechanics, 08 (07). pp. 253-271. ISSN 2160-049X

Joseph, Oyepata Sunday and Baba, N. Z. and Idowu, E. T. and Adediran, A. A. (2023) Impacts of Clinker Storages Heat Transfer, Its Effect on Vertical Roller Cement Performances: A Case Study of Cement Grinding Operations in Nigeria. Journal of Engineering Research and Reports, 25 (7). pp. 66-81. ISSN 2582-2926

Jr., A. Sumagpang and Gomez, F. R. (2020) Addressing Package Voids on Extremely Small Leadframe Device. Journal of Engineering Research and Reports, 16 (4). pp. 1-7. ISSN 2582-2926

K

Karthikeyan, G. and Sankaran, S. (2020) Influence of Intake Air Humidification on Emission of a Port Fuel Injected SI. In: Recent Developments in Engineering Research Vol. 2. B P International, pp. 142-149. ISBN 978-93-90206-88-9

Kayumov, Juramirza Abdiramatovich and Nazarova, Matluba and Obilov, Bohodir Vohobjon Ogli and Dadaboyev, Farhodjon Mahmudjonovich and Mamadaliyeva, Zuhra Yigitaliyevna (2021) Analysis of the Composition and Physical and Mechanical Properties of Raw Materials for Thermal Insulation Fabrics. Engineering, 13 (06). pp. 352-359. ISSN 1947-3931

Khodievich Khojmetov, Gaibnazar and Irismetovich Khodjimetov, Alinazar and Sayfullaevich Yuvmitov, Anvar (2015) Influence of Soil-Foundation Interaction Properties on Oscillations of the System “Building-Building” and “Building-Stack-Like Structure”. World Journal of Mechanics, 05 (06). pp. 106-116. ISSN 2160-049X

Kurazumi, Yoshihito and Fukagawa, Kenta and Sakoi, Tomonori and Naito, Akie and Imai, Motoe and Hashimoto, Reiko and Kondo, Emi and Tsuchikawa, Tadahiro (2021) Clothing Thermal Insulation for Typical Seasonal Clothing of Infant with Infant Thermal Manikin. Engineering, 13 (07). pp. 372-387. ISSN 1947-3931

L

Lyashenko, Iakov A. and Pohrt, Roman (2020) Adhesion Between Rigid Indenter and Soft Rubber Layer: Influence of Roughness. Frontiers in Mechanical Engineering, 6. ISSN 2297-3079

M

Mohammad Ali, Basma U. and Hamawandi, Rafid Al (2020) Coaching Threshold – Architectural Altered Teaching Method Paradigm a Scientific Approach of Applied Experimental Showcase in Iraq. In: Recent Developments in Engineering Research Vol. 2. B P International, pp. 125-141. ISBN 978-93-90206-88-9

Murali, M. (2021) Assessment of a Genetic Algorithm Based Security Constrained Economic Dispatch Approach for LMP Calculation. In: Novel Perspectives of Engineering Research Vol. 4. B P International, pp. 10-23. ISBN 978-93-5547-358-5

Musingi, Dorcas Mutheu and Munywoki, Michael Mbindyo and Musingi, Benjamin Musyimi (2021) Evaluation of Sea-Water Intrusion in Coastal Aquifers Using both Numerical Methods and Causal Research: A Case Study of Mombasa, Kenya. Engineering, 13 (07). pp. 388-398. ISSN 1947-3931

N

N., Mohan Reddy and Ch., Kalyan Kumar and Jamil, Kaiser and M., Lakshmi Narasu (2024) Possible Association between Resistin Gene -420 C/G Polymorphism and Its Expression and Clinicopathology in Women with Breast Cancer. In: New Visions in Medicine and Medical Science Vol. 1. B P International, pp. 165-177. ISBN 978-81-971219-7-5

Nakano, Ken and Kono, Masaharu (2020) Transient and Steady Sliding Friction of Elastomers: Impact of Vertical Lift. Frontiers in Mechanical Engineering, 6. ISSN 2297-3079

Ngon, Truong Trong and Lee, Suk-Ha (2024) Finding Genetic Variation in Soybean (Glycine max (L.) Merrill) Flowering Time by Simple Sequence Repeat Marker. In: Research Perspectives of Microbiology and Biotechnology Vol. 1. B P International, pp. 168-186. ISBN 978-81-971580-3-2

Nkomo, Duduzile and Mwamba, Alain (2021) A Review on Osmium: Beneficiation Opportunities. In: Advanced Aspects of Engineering Research Vol. 14. B P International, pp. 77-91. ISBN 978-93-91215-89-7

Nwafor, Solomon C. and Nwobi-Okoye, Chidozie C. and Okafor, Benjamin E. and Nwankwo, Kenneth K. and Onwuchekwa, Chinenye (2024) An Automatic Sliding Door: Leveraging Locally Sourced Materials for Innovation. Journal of Engineering Research and Reports, 26 (3). pp. 197-207. ISSN 2582-2926

O

Oba, K. M. (2024) The Application of Mathematical Modelling to Optimize Steel Reinforcement Shipping Cost for Construction Projects by Julius Berger. Journal of Engineering Research and Reports, 26 (3). pp. 190-196. ISSN 2582-2926

Okibe Edeoja, Alex and Ekoja, Matthew and Sunday Ibrahim, Joshua (2018) Turbine Dimensionless Coefficients and the Net Head/Flow Rate Characteristic for a Simplified Pico Hydro Power System. Journal of Engineering Research and Reports, 1 (1). pp. 1-17. ISSN 2582-2926

Oludare Fagbohun, Olumuyiwa and Adebanji, Bankole and O. Oke, Micheal (2018) Optimal Design of Independent Mini Hydro-photovoltaic-battery-diesel Hybrid Power System for Erin-ijesha Water Fall, Nigeria. Journal of Engineering Research and Reports, 1 (1). pp. 1-11. ISSN 2582-2926

P

Pandey, Prashant Kumar and Rathi, Rajeev and Singh, Mahipal and Verma, Jagesvar (2024) Experimental analysis on microstructure, mechanical properties, and corrosion behavior of TIG welded AISI 444 ferritic stainless steels. Engineering Solid Mechanics, 12 (1). pp. 93-102. ISSN 22918744

Pape, Florian and Coors, Timm and Poll, Gerhard (2020) Studies on the Influence of Residual Stresses on the Fatigue Life of Rolling Bearings in Dependence on the Production Processes. Frontiers in Mechanical Engineering, 6. ISSN 2297-3079

Parate, R. K. and Sharma, S. J. (2021) Design of a Low Cost Biomedical Parameter Monitoring System. In: Novel Perspectives of Engineering Research Vol. 4. B P International, pp. 1-9. ISBN 978-93-5547-358-5

Q

Qu, Shaochun and Cui, Jian and Cao, Zijian and Qiao, Yongxing and Men, Xuemeng and Fu, Yanfang (2024) Position Estimation Method for Small Drones Based on the Fusion of Multisource, Multimodal Data and Digital Twins. Electronics, 13 (11). p. 2218. ISSN 2079-9292

R

Raghunathan, T. (2021) Recent Research of Lime Mortar and FAL-G with Urea. In: Advanced Aspects of Engineering Research Vol. 14. B P International, pp. 98-103. ISBN 978-93-91215-89-7

Rao, A. Subba and Prasad, V. R. and Nagendra, N. and Murthy, K. V. N. and Reddy, N. Bhaskar and Beg, O. Anwar (2015) Numerical Modeling of Non-Similar Mixed Convection Heat Transfer over a Stretching Surface with Slip Conditions. World Journal of Mechanics, 05 (06). pp. 117-128. ISSN 2160-049X

Rosenow, Judith and Chen, Gong and Fricke, Hartmut and Sun, Xiaoqian and Wang, Yanjun (2021) Impact of Chinese and European Airspace Constraints on Trajectory Optimization. Aerospace, 8 (11). p. 338. ISSN 2226-4310

S

S, Vanithamani (2024) Improving Vehicle Detection and Analyzing Motion Features through Advanced Techniques. In: Theory and Applications of Engineering Research Vol. 9. B P International, pp. 152-159. ISBN 978-81-971580-7-0

Sabinay, Chona B. and Gumabay, Maria Visitacion N. (2020) Investigating the Effect of Single Pass Laser Surface Treatment on Microstructure Evolution of Inoculated Zr47.5Cu45.5Al5Co2 and Non-Inoculated Zr65Cu15Al10Ni10 Bulk Metallic Glass Matrix Composites. In: Recent Developments in Engineering Research Vol. 4. B P International, pp. 137-162. ISBN 978-81-947204-1-6

Said, Reda Abdel Hameed Abdelghany (2021) Plastic Waste Recycling as Green Corrosion Inhibitors for Steel in a Variety of Corrosive Media. In: Advanced Aspects of Engineering Research Vol. 14. B P International, pp. 112-125. ISBN 978-93-91215-89-7

Santopuoli, Nicola and Pecoraro, Ilaria (2021) Historic Centers Restoration and Ancient Buildings Energetic Efficiency Improvement. In: Advanced Aspects of Engineering Research Vol. 8. B P International, pp. 82-90. ISBN 978-93-90888-73-3

Sathish, D. and Veeramanikandan, M. and Vijayakumar, R. (2024) Fluid Mechanics and Machinery Lab Manual. B P International. ISBN 978-81-972870-9-1

Sharma, Vishambhar Dayal and Jatav, G. P. and Shukla, Supriya and Pradeep, S. and Sagar, Anjali and Upadhay, Shivangi and Chouhan, Manisha and Parihar, Surya Pratap Singh and Ahirwar, Manoj Kumar (2022) Artificial Intelligence in Veterinary Pathology. In: Techniques and Innovation in Engineering Research Vol. 4. B P International, pp. 83-101. ISBN 978-93-5547-989-1

Shawky Awad, A. and Hemdan Nasr-Allah, T. and Abdallah Mohamed, Y. and Mohamed Abdel-Aal, G. (2018) Minimizing Scour of Contraction Stepped Spillways. Journal of Engineering Research and Reports, 1 (1). pp. 1-11. ISSN 2582-2926

Shneor, Yair and Chapsky, Vladimir (2021) Error Prediction in Industrial Robot Machining: Optimization Based on Stiffness and Accuracy Limit. Engineering, 13 (06). pp. 330-351. ISSN 1947-3931

Sosnovskiy, L. A. and Bogdanovich, A. V. and Sherbakov, S. S. (2015) Cyclic Elasto-Plastic Fracture Diagram and Some Parameters of Cyclic Crack Growth Resistance for the Plastic Steels. World Journal of Mechanics, 05 (05). pp. 80-85. ISSN 2160-049X

Stanasel, I. and Blaga, F. S. and Buidos, T. (2021) Study on Manufacturing Based on Feature Recognition Using NX. In: New Approaches in Engineering Research Vol. 15. 978-93-5547-064-5, pp. 1-10. ISBN 978-93-5547-064-5

Sunitha, H. D. and Keshaveni, N. (2022) Design & Optimization of LDMOS Transistor Using Doped Silicon Pockets in Buried Oxide. In: Techniques and Innovation in Engineering Research Vol. 4. B P International, pp. 66-82. ISBN 978-93-5547-989-1

T

Tipparti, Anil Kumar and Anjaneyulu, Lokam (2021) Massive MIMO for 5G Network: Fundamentals, Challenges and Key Technologies. In: Advanced Aspects of Engineering Research Vol. 14. B P International, pp. 104-111. ISBN 978-93-91215-89-7

U

U. Ufoaroh, Stephen and Nnamani, Kelvin N. and N. Aniedu, Azubuike (2021) Real-time Optimization and Implementation of Multi-rate Digital FIR Kernel Filter. Journal of Engineering Research and Reports, 21 (7). pp. 44-58. ISSN 2582-2926

Ugo, Glory Chinwe and Apata, A. C. and Dawodu, Praise Onimisi (2024) A Multi-Stakeholder Perspective on the Limitations of Implementing Artificial Intelligence in Highway Transport. Journal of Engineering Research and Reports, 26 (2). pp. 243-249. ISSN 2582-2926

Una, Dominica and Appah, Dulu and Amieibibama, Joseph and Eke, William Iheanyi and Akaranta, Onyewuchi (2021) Structure-property Relationship of Flavonoids as Potential Green Inhibitors for Oilfield Scales: A Mini-review. Journal of Engineering Research and Reports, 21 (6). pp. 41-51. ISSN 2582-2926

Uspensky, M. (2022) Difficulties in Reliability Evaluation of Microprocessor Protections. In: Techniques and Innovation in Engineering Research Vol. 4. B P International, pp. 58-65. ISBN 978-93-5547-989-1

V

Vasanthanathan, A. and Amudhan, K. and Nithish Karthick, M. and Pandeeswaran, V. and Yogesh Rahav, K. (2023) Marine hatch covers using light-weight GFRP composites: Experiments and finite element simulations. Engineering Solid Mechanics, 11 (4). pp. 379-388. ISSN 22918744

W

Wang, Jianbin and Li, Dadi and Qu, Sheng and Zhang, Dafu (2021) A Nondestructive Instrumented Wheelset System for Contact Forces Measurements. Engineering, 13 (07). pp. 361-371. ISSN 1947-3931

Wu, Ding (2023) Analysis of Fatigue Fracture Accidents of Welded I-beam Bridges, Key Technology and Demolition Method in Australia. Journal of Engineering Research and Reports, 25 (9). pp. 39-44. ISSN 2582-2926

X

Xiangdong, Kong and Shaojie, Yang and Xueyu, Mu (2021) Summary of Research on Magnetic Fluid and Its Inclination Sensor. Journal of Engineering Research and Reports, 21 (6). pp. 52-57. ISSN 2582-2926

Xie, Yajuan and Yu, Song and Li, Bangxiang and Xu, Ziyao and Zhu, Weishen (2018) Theoretical Analysis and Experimental Verification of Crack Initiation Characteristics of Compression-Shear Plane Crack with Hydraulic Pressure. World Journal of Mechanics, 08 (09). pp. 378-386. ISSN 2160-049X

Xu, Jiulong and Hao, Yongping and Wang, Junjie and Li, Lun (2021) The Control Algorithm and Experimentation of Coaxial Rotor Aircraft Trajectory Tracking Based on Backstepping Sliding Mode. Aerospace, 8 (11). p. 337. ISSN 2226-4310

Xu, Yang and Zhou, Rongxin (2021) Adhesive Boundary Element Method Using Virtual Crack Closure Technique. Frontiers in Mechanical Engineering, 7. ISSN 2297-3079

Y

Yu, Kai (2023) Numerical Simulation Study of Dredger Impeller Based on Fluid-Solid Coupling. Journal of Engineering Research and Reports, 25 (7). pp. 111-120. ISSN 2582-2926

Yuan, Weike and Wang, Gangfeng (2020) Boundary Element Calculations for Normal Contact of Soft Materials With Tensed Surface Membrane. Frontiers in Mechanical Engineering, 6. ISSN 2297-3079

Yusuf, Samson Dauda and Mohammed, Kabiru Osu and Loko, Abdulmumini Zubairu (2024) Analysis and Prediction of Path Loss for Mobile Communication Lines in Nasarawa State Using Propagation Models. Journal of Engineering Research and Reports, 26 (11). pp. 129-140. ISSN 2582-2926

Z

Zerfu, Kefiyalew and Ekaputri, Januarti Jaya (2021) Deflection Function Formulation for Simply Supported thin Plate Using Variational Approach. In: Advanced Aspects of Engineering Research Vol. 8. B P International, pp. 64-73. ISBN 978-93-90888-73-3

Zhang, Ershi (2024) Parametric Modeling Method for Rapid Bridge Layout Using BIM Technology: A Revit and Excel Integration Approach. Journal of Engineering Research and Reports, 26 (12). pp. 47-56. ISSN 2582-2926

Zhang, Jingyi (2021) Surface Roughness Characterization for Stress Concentration Factor Predictions: A Bayesian Learning Approach. Journal of Engineering Research and Reports, 21 (7). pp. 59-70. ISSN 2582-2926